Product List

(Total 82 Products )
It is applicable for the building, depot, pumping station, satellite communications devices, airport, and so on.
Min. Order: 10 Pieces
Service condition:

The product has indoor type and outdoor type, it can be used for motor, circuit, power plant, transformer station and other AC equipment, as well as protect ...
TNR-BNC series multi-interface signal lightning protector are designed according to IEC standard level;8,12,16,24 and 48 channels, standard BNC interface ,multi-loop, each loop ...
Service condition:

1 Ambient temperature: -40 ~ +40C

2 Altitude: Not more than 2000m;

3 Frequency of power: From 48Hz to 62Hz; ;

4 Earthquake intensity: Not higher ...
Technical data:

Working frequency 0-2G

Continuous voltage ≤64 V

Standard discharge current 5KA

Limited voltage ≤ 200 V

Standing wave rate ≤ 1.2

Interface type ...
Applied for single-phase, three-phase surge protection under various power supply system through different combinations. Applicable for B, C, D class protection, it adapts to ...
It is appliacble for the terminal of power system devices, widely used for IT system, household appliance against lightning.
This product is applied for protecting the buildings and outdoor device that subjects to lightning easily in the first grade lightning protection area. Used for main distribution ...
Min. Order: 50 Pieces
Applied for single-phase, three-phase surge protection under various power supply system through different combinations. Applicable for B, C, D class protection, it adapts to ...
TNR-RJ type signal protector devices are designed according to IEC standard, the interface form is standard RJ45, RJ11 crystal joint, it can protect 1 pair or 2pairs communication ...
Service condition:

1 Ambient temperature: -40 ~ +40C

2 Altitude: Not more than 2000m;

3 Frequency of power: From 48Hz to 62Hz; ;

4 Earthquake intensity: Not higher ...
Service condition:

The product has indoor type and outdoor type, it can be used for motor, circuit, power plant, transformer station and other AC equipment, as well as protect ...
TNR-B,C,D series surge protector devices are applicable to A.C50-60Hz,380V or below electric equipment,TT,TN etc power supply system.Widely applicable to all kinds of power supply ...
TNR-B, C, D series surge protector devices are applicable to A. C50-60Hz, 380V or below electric equipment, TT, TN etc power supply system. Widely applicable to all kinds of power ...
TNR-B30 series surge protector device is applicable to A.C50-60HZ,380V and below TT,TN etc. power supply system, widely applicable to kinds of power supply second class(B ...
TNR-RJ type signal protector devices are designed according to IEC standard, the interface form is standard RJ45, RJ11 crystal joint, it can protect 1 pair or 2pairs communication ...
Service condition:

1 Ambient temperature: -40 ~ +40C

2 Altitude: Not more than 2000m;

3 Frequency of power: From 48Hz to 62Hz; ;

4 Earthquake intensity: Not higher ...
Service condition:

1 Ambient temperature: -40 ~ +40C

2 Altitude: Not more than 2000m;

3 Frequency of power: From 48Hz to 62Hz; ;

4 Earthquake intensity: Not higher ...
TNR-B, C, D series surge protector devices are applicable to A. C50-60Hz, 380V or below electric equipment, TT, TN etc power supply system. Widely applicable to all kinds of power ...
Technical data(N-PE):

Continuous voltage Uc (V~) 250

DC breakdown voltage (100V/S) (V) 500

Impulse breakdown voltage (1KV/μs) (V) ≤ 1100

Max impulse withstand ...
25pin type, can prevent the equipment from damaging from lightning strike over voltage or surge voltage in system.

Operating voltage: 6V 12V

Clamping voltage: 8V 18V
...
It is appliacble for the terminal of power system devices, widely used for IT system, household appliance against lightning.
TNR-B,C,D series surge protector devices are applicable to A.C50-60Hz,380V or below electric equipment,TT,TN etc power supply system.Widely applicable to all kinds of power supply ...
Service condition:

1 Ambient temperature: -40 ~ +40C

2 Altitude: Not more than 2000m;

3 Frequency of power: From 48Hz to 62Hz; ;

4 Earthquake intensity: Not higher ...
Type: TNR-JA

Working voltage: DC 6-500 V / AC 6-500 V

Action current: 0.1A-50KA

Counting Times: 0-99

Data collection: Induction sampling; Mutual inductance sampling
It is appliacble for the terminal of power system devices, widely used for IT system, household appliance against lightning.
Applied for single-phase, three-phase surge protection under various power supply system through different combinations.Applicable for B, C, D class protection, it adapts to ...
TNR-RS232 series signal surge protector are applied to all kinds of communication or computer network equipment of data, analog signal transmission, are separated into three ...

Last Login Date: Sep 26, 2016

Business Type: Manufacturer/Factory, Trading Company

Main Products: Surge Protection Device, SPD, Lightning Arresters, Lightning Protection Box, Signal Lightning Protector, Lightning Rod, Varistor, Lightning Protection Socket